PRODUCT ASSEMBLY PICTURESIllustrated below is the assembly of our Single Mini Stackable. The principles of assembly are the same for all units. If you have any questions do not hesitate to contact us toll free 1-866-498-2378.
|
 |  |  |  |
| First you will want to screw the cambolts into the holes with the plastic sleeve. This will be done on the two side panels as well as the top and bottom panel. | Next insert the camlocks into the larger drilled holes on the back panel and the two side panels.
| Now you are ready to attach the side panel to your back panel. The cambolt will fit into the hole drilled into the side of the back panel. | The cambolt will then be inserted into the camlock through the side of the panel. Use your screwdriver to turn the camlock a quarter turn. This will lock the two panels together. |
 |  |  |  |
Continue by attaching the top panel to your unit in the same fashion as the side panels.
| Now you can take your four casters and attach them to the bottom panel. There are pre-drilled holes on the bottom panel that you may use as a guide. | The Bottom panel will then be attached to your cabinet as before. |
 | Your unit is now put together and you may begin to install your drawers. First snap the two drawer rails apart. There is a left and a right rail. Your left rail should look like an "L" when it is installed. It is usually easier to start at the bottom of your unit, remembering that the bottom drawer does not require a rail. Then continue by inserting the drawer rail into the open hole above your bottom drawer. If you are using paper shelves you will want to insert the metal dowels provided into the bottom two holes and the front and the second from the bottom two holes at the back. You will then insert the paper shelf so the front rests on the front two dowels and the back of the shelf will clip into the back two dowels one row up creating a slight angle to your shelf. This will allow the paper to sit nicely on your shelf. |
